(→Testing reader connection) |
|||
Line 13: | Line 13: | ||
==Testing reader connection== | ==Testing reader connection== | ||
Before proceeding test that your reader answers through network connection. | Before proceeding test that your reader answers through network connection. | ||
+ | |||
+ | Run ping test using Windows Command Prompt or Power Shell. | ||
+ | |||
C:\Users\user>ping 10.1.1.3 | C:\Users\user>ping 10.1.1.3 | ||
Pinging 10.1.1.3 with 32 bytes of data: | Pinging 10.1.1.3 with 32 bytes of data: | ||
Line 18: | Line 21: | ||
Reply from 10.1.1.3: bytes=32 time=2ms TTL=127 | Reply from 10.1.1.3: bytes=32 time=2ms TTL=127 | ||
Reply from 10.1.1.3: bytes=32 time=2ms TTL=127 | Reply from 10.1.1.3: bytes=32 time=2ms TTL=127 | ||
+ | |||
+ | If bellow appears then something is wrong. Check your reader power and network cables. | ||
+ | |||
+ | Reply from 192.168.7.226: Destination host unreachable. | ||
+ | |||
==Configure Putty== | ==Configure Putty== | ||
===Tunnel settings=== | ===Tunnel settings=== |
Revision as of 19:24, 9 February 2016
This page instructs you how to connect your reader device to our network for debugging purposes.
Contents
Download Putty (Windows)
Putty is a telnet/ssh client software capable of tunneling tcp connections to different networks.
Download and install putty-0.66-installer.exe
Connect reader
Connect your reader to the same computer or network where you start Putty.
Power up your reader.
Testing reader connection
Before proceeding test that your reader answers through network connection.
Run ping test using Windows Command Prompt or Power Shell.
C:\Users\user>ping 10.1.1.3 Pinging 10.1.1.3 with 32 bytes of data: Reply from 10.1.1.3: bytes=32 time=2ms TTL=127 Reply from 10.1.1.3: bytes=32 time=2ms TTL=127 Reply from 10.1.1.3: bytes=32 time=2ms TTL=127
If bellow appears then something is wrong. Check your reader power and network cables.
Reply from 192.168.7.226: Destination host unreachable.
Configure Putty
Tunnel settings
Configure Putty to tunnel traffic from our network to your reader device.
Navigate to -> Connection -> SSH -> Tunnels
Enter destination address:port
pair as your reader tcp/ip address and port.
- Ports of protocols: HTTP: 80, Saturn: 50007, Mercury: 2324, P3: 5403
Set source port same as destination port.
Set other checkboxes as the screen shows bellow and remember to click Add
button.
Connection settings
Navigate to -> Sesson
Enter hostname and port: router.rainio.org 2202
Check that connection type is: SSH
Enter name reader debug
to Saved sessions and click Save
After saving, click Open
to start connection.
Authentication
After connecting it will ask username and password.
Username is: tunnel
Pasword is: Tunnel634
Debugging
If login is succesfull, an empty black screen appears. Just leave it as is. Do not close the screen or window.
We will tell you when you are free to close connections and windows.